Make sure that the PSU is positioned horizontally and lays flat on the four rubber pads on its base.What's crucial here, though, is that Sony kept the PS4's weight to a manageable 6.1 lbs and tucked the power supply inside the system, leaving no external power brick to trip over.Don't stack other electronic devices on top of the PSU.Don't put the PSU near any heat source, such as a radiator, a heat register, a stove, or an amplifier.Don't put the PSU in a confined space, such as a bookcase, a rack, or a stereo cabinet, unless that space is well-ventilated.Don't put the PSU on a bed, a sofa, or any other soft surface that might block the ventilation openings.Don't block any ventilation openings on the PSU.To help the power supply operate efficiently and safely, follow these precautions: If the fan speed changes, the whirring noise that the fan produces increases or decreases. The speed of the fan increases or decreases when the temperature of the PSU changes.If your console is in Instant-On power mode, the PSU is still on and the fan will spin.When your console is in energy-saving mode, or when it’s disconnected from the PSU, the fan doesn’t operate.Typically, the fan makes a "whirring" noise.The PSU fan automatically starts when you press the power button to start your console.To provide sufficient cooling, the Xbox One external power supply uses a built-in fan to blow air through the PSU. Power supply placement, temperature, and noise The plug type depends on the country and region where you purchased your console. The plug at the end of the power cord that connects to your electrical outlet can be one of several types.If you use a power cord other than the one designed for your PSU, you may damage it or your console. The end of the power cord that plugs into the PSU has two holes.The AC power cord is approximately 5 feet, 9 inches (1.2 meters) long.The AC power cord is detachable from the PSU. The AC power cord connects the PSU to the wall socket. This connector is designed specifically for the Xbox One console power socket. A proprietary power connector is permanently attached to the end of the DC power cord.The DC power cord is approximately 3 feet, 6 inches (1.1 meters) long.The PSU has a hard-wired, direct-current (DC) power cord that connects the PSU to the console. Therefore, you can’t replace the internal fuse. The Xbox One PSU contains an internal fuse that helps protect your console from voltages that are too high and power surges.If you use the PSU in a different country, it or your console may be damaged, and the warranty may be invalidated. Don't use the Xbox One external PSU outside the country where it was sold.Don't use an unlicensed accessory, such as a non-Microsoft replacement PSU, or any accessory that plugs in between the console and the PSU.
Don't try to use an Xbox One PSU that was built for a region that has different power requirements.PSUs are designed to be used only in the regions where they are sold.The use of any accessory other than the standard Xbox One PSU may damage your console and void your console warranty.
#Xbox 360 s power brick license
Important Microsoft does not license any non-Microsoft accessories that plug into the Xbox One console's power socket.
There are no dimensional changes between the 100-110V, 220-240V, and 100-240V versions. Note that the PSU has the same basic design in all countries. Your Xbox One console has an external fan-assisted power supply unit (PSU). Depending on the power requirements of the console, a 203-watt PSU, a 175-watt PSU, or a 150-watt PSU may have been included.